2010 7.0m Simmer SCS rigged on Simmer 460 100% Carbon Mast.
Simmer Rigging Video:
http://www.youtube.com/SIMMERinternational#p/u/16/jhn2MXJrVGs
Share
Sunday 13 December 2009
Simmer 2010 SCS 7.0
Subscribe to:
Post Comments (Atom)
Windsurfing - Speed, Slalom & Formula
About Me
- Trent Cornwall
- Windsurfer, Auckland, NZ
Sponsors
Weather
Links
Blog Archive
- October 2012 (1)
- February 2012 (1)
- August 2011 (1)
- February 2011 (2)
- October 2010 (1)
- April 2010 (2)
- February 2010 (1)
- December 2009 (1)
- May 2009 (1)
- April 2009 (1)
- March 2009 (1)
- October 2008 (1)
- July 2008 (1)
- February 2008 (3)
- November 2007 (1)
- October 2007 (1)
- May 2007 (1)
- April 2007 (3)
- December 2003 (1)
2 comments:
Ciao, my scs 7.0 2010 with simmer mast sc10, is very hard to rotate the camber,i tried differend misure on the downhaul and outhaul but i didn't resolvethe problem. The profile is very deep and the sail became damage when fall down in the water and crawl on the top of the board... anyone
I find with the correct downhaul the sail rotation is good and easier that the SCR. The batten below the boom is the tightest rotation due to the shape. To judge the correct setting I downhaul until the sail becomes loose all the way in to the joiner on the 3rd batten down from the head - approx 2/3 across sail.
Post a Comment